POLINOX Ring Wheels Unitized Discs PNER-W 7506-6 C FINE (soft)

POLINOX Ring Wheels Unitized Discs PNER-W 7506-6 C FINE (soft)

POLINOX?unitized wheels PNER and unitized discs PNER consist of multiple layer, strongly compressed non-woven material, bonded with a special grit resin system.

Recommendations for use:
- When working on materials with poor heat conductivity, e.g. titanium and stainless steel, significantly reduce the cutting speed
- Flexible shafts, electric and air-powered straight grinders as well as angle grinders and fillet weld grinders can be used as tool drives

Designed for use on straight grinders and flexible shaft drives. Particularly suitable for work on small surfaces of stainless steel (INOX) and titanium alloy components. Unmounted grinding wheels with diameter 150 mm can also be used on grinding blocks, for reworking surgical instruments for example.

Abrasives:
A = Aluminium oxide
C = Silicon carbide (SiC)

Recommendations for use:
- POLINOX?unitized wheels PNER achieve their best performance at a cutting speed of 15-35 m/s. This provides an ideal compromise between stock removal, surface quality, themal load on the workpiece and tool wear.

Safety notes:
- For safety reasons, it is imperative to remain within the stated maximum permitted rotational
speed at all times