COMBIDISC Abrasive Discs - Zirconia Alumina - CDR Type
SKU
20438
0.00 kg
COMBIDISC Abrasive Discs - Zirconia Alumina - CDR Type
Suitable for work on all hard steels. Particularly good stock removal in coarse grinding applications using grit sizes 36 and 60.
Abrasive: Zirconia alumina Z
The COMBIDISC?range covers a large selection of grinding tools for surface finishing. From coarse machining and surface texturing to face-down mirror polishing - the range provides the optimal tool, even for complicated applications.
Advantages:
- Easy to use
- Rapid tool change
- No adhesion, no slipping
- No loosening under the influence of heat
- Vibration-free operation
- Tool is always fixed centrally
Application examples:
- Tool and mould construction, modelling
- Mechanical engineering, automotive construction
- Aeronautical and aerospace industry
- Aircraft engine construction and repair
- Equipment, tank and pressure vessel construction (e.g. for foodstuff and chemical industry)
- Fettling of small parts
Recommendations for use:
- Use grinding oil that is suitable for the material in order to significantly increase the tool life and the abrasive performance of the tools
Safety notes:
- The maximum permitted peripheral speed is 50 m/s
- For safety reasons, it is imperative to remain within the stated maximum permitted rotational
speed at all times
Suitable for work on all hard steels. Particularly good stock removal in coarse grinding applications using grit sizes 36 and 60.
Abrasive: Zirconia alumina Z
The COMBIDISC?range covers a large selection of grinding tools for surface finishing. From coarse machining and surface texturing to face-down mirror polishing - the range provides the optimal tool, even for complicated applications.
Advantages:
- Easy to use
- Rapid tool change
- No adhesion, no slipping
- No loosening under the influence of heat
- Vibration-free operation
- Tool is always fixed centrally
Application examples:
- Tool and mould construction, modelling
- Mechanical engineering, automotive construction
- Aeronautical and aerospace industry
- Aircraft engine construction and repair
- Equipment, tank and pressure vessel construction (e.g. for foodstuff and chemical industry)
- Fettling of small parts
Recommendations for use:
- Use grinding oil that is suitable for the material in order to significantly increase the tool life and the abrasive performance of the tools
Safety notes:
- The maximum permitted peripheral speed is 50 m/s
- For safety reasons, it is imperative to remain within the stated maximum permitted rotational
speed at all times
Related Products By Brand
